Iwatsu CS-3000 Series, Instruction Manual

Page: 29 / 234

Capter 2
Name and Function of Each Part (Outline)
Curve Tracer CS-3000 Series Instruction Manual 2-11
Table 2.9 Name and function of each part on test fixture CS-302
The terminal since
⑩
is terminals in the patch panel of test fixture CS-302 among in the table below.
When the test adaptor is used, the patch panel should be necessary, and the terminal since these
⑩
be connected.
No. Name Description Ref.
①
COLLECTOR SUPPLY HIGH
VOLTAGE Output terminal of the collector supply during
high-voltage mode Section 3.7
②
COLLECTOR SUPPLY SENSE Kelvin sense terminal of the collector supply Section 3.7
③
COLLECTOR SUPPLY HIGH
CURRENT Output terminal of the collector supply during high
current mode Section 3.7
④
EMITTER/SOURCE/CATHODE Output terminal of emitter/source/cathode Section 3.7
⑤
EMITTER/SOURCE/CATHODE
SENSE Kelvin sense terminal of emitter/source/cathode Section 3.7
⑥
BASE/GATE Output terminal of step signal Section 3.6
⑦
BASE/GATE SENSE Kelvin sense terminal of step signal Section 3.6
⑧
AUX Output terminal of external output voltage Section
3.11.6
⑨
AUX GROUND Ground terminal of external output voltage Section
3.11.6
⑩
COLLECTOR SUPPLY, HIGH
VOLTAGE OR HIGH CURRENT
It connects to
①
COLLECTOR SUPPLY HIGH
VOLTAGE or
③
COLLECTOR SUPPLY HIGH
CURRENT.
Section 3.7
⑪
COLLECTOR SUPPLY SENSE
It connects to the
②
COLLECTOR SUPPLY
SENSE.
Section 3.7
⑫
EMITTER/SOURCE/CATHODE
It connects to
④
EMITTER/SOURCE/CATHODE.
Section 3.7
⑬
EMITTER/SOURCE/CATHODE
SENSE
It connects to
⑤
EMITTER/SOURCE/CATHODE
SENSE
Section 3.7
⑭
BASE/GATE
It connects to
⑥
BASE/GATE
Section 3.6
⑮
BASE/GATE SENSE
It connects to
⑦
BASE/GATE SENSE
Section 3.6
⑯
BASE/GATE 1k Ω It makes the internal connection through the base
terminal of
⑰
and 1k Ω resistance. Connect it with
the output terminal of
⑥
step signal instead of
⑭
when using it.
Section 3.3
⑰
ADAPTER EXCLUSIVE USE These are terminals that install the test adapter. Section 3.3