Iwatsu CS-3000 Series Instruction Manual Download Page 25

Page: 25 / 234

Capter 2

Name and Function of Each Part (Outline)

Curve Tracer CS-3000 Series Instruction Manual

2-7

2.1.5 DISPLAY

Figure 2.6 shows DISPLAY part on the front panel and Table 2.6 lists name and function of each

part.

Figure 2.6 Front panel (DISPLAY part)

Table 2.6 Name and function of each part on front panel (DISPLAY part)

№

Name

Description

Ref.

①

MENU key

VECTOR

AVERAGE

PERSISTENCE

REF VIEW

SAVE REF

It selects whether spaces between data pieces are interpolated with

straight lines when being displayed or only data is displayed with

dots without interpolation.

It sets the number of AVERAGEs (OFF, 2 to 255).

It sets the persistence display time.

It displays the waveform saved in REF number in white.

It saves the currently displayed waveform in REF number.

Section

3.10.1

②

INVERT key/lamp

It switches reversed waveform display/not reversed. The lamp turns

on for reversed display.

Section

3.10.2

③

VIEW / PULSE key

VIEW MODE

WAVE 1st

WAVE 2nd

PULSE WIDTH

MEASUREMENT

POINT

It switches TRACE/WAVE.

It selects

→

Vce

→

Vbe of waveform in sequence which is

displayed on the WAVE

1st

It selects

→

Vce

→

Vbe of waveform in sequence which is

displayed on the WAVE

2nd.

It sets the output pulse width of the step generator. (Available only

when the submenu STEP is set to +PULSE/-PULSE)

It can arbitrarily set the timing to measure the output pulse from the

step generator in 10μs step. (Available only when the submenu

STEP is set to +PULSE/-PULSE)

Section

3.10.3

④

CURSOR key

It sets cursor OFF, DOT cursor, fLINE cursor, FREE cursor, or

WINDOW cursor.

It also selects the display renewal rate (FAST, MID, SLOW).

Section

3.10.4

⑤

ZOOM key/lamp

The screen is enlarged with the setting magnification using the

middle on the screen as the center.

When ZOOM is set to ON, the lamp turns on.

Section

3.10.5

⑥

POSITION key

It sets the origin of trace in horizontal and vertical direction.

Section

3.10.6

⑦

HORIZONTAL

VOLTS/DIV

It sets the horizontal range (VOLTS/DIV) of the screen and the

source (STEP, BASE-EMITTER, and COLLECTOR).

Section 3.9.1

⑧

VERTICAL

CURRENT/DIV

It sets the vertical range (CURRENT/DIV) of the screen and the

source (STEP, EMITTER, and COLLECTOR).

Section 3.9.2

Summary of Contents for CS-3000 Series










































































































































































































































Search results

Summary of Contents for CS-3000 Series

Reviews:

Related manuals for CS-3000 Series

Brands by name

Popular brands

Iwatsu CS-3000 Series, Instruction Manual

Search results

Summary of Contents for CS-3000 Series

Reviews:

Related manuals for CS-3000 Series

Brands by name

Popular brands