Iwatsu CS-3000 Series, Instruction Manual

Page: 213 / 234

Chapter 5 Daily Maintenance and Calibration
Curve Tracer CS-3000 Series Instruction Manual 5-3
5.2 Calibration
It is recommended that CS-3000 be calibrated regularly for accurate measurement.
For regular calibration of the entire instrument, contact Iwatsu office or our sales distributors.
Regular calibration once per year
is recommended.
Address : 7-41 Kugayama 1-chome Suginami-ku Tokyo, 168-8501 Japan
Phone
: +81 3 5370 5483
Facsimile : +81 3 5370 5492
Homepage : http://www.iti.iwatsu.co.jp
5.3 Repair and sending of repaired instrument
If a failure occurs, contact Iwatsu or our sales distributors. If an unexpected failure by our fault
occurs during the warranty period, it can be repaired without charge.
When sending the instrument, please write the instrument name, instrument number, failure, name,
place, and telephone number of the person in charge clearly.
To avoid an accident during transportation when sending it, use the corrugated carton box used for
delivery or equivalent: i.e., having shock absorbing materials. If a proper packing box is not found,
contact Iwatsu office or our sales distributors.
Address : 7-41 Kugayama 1-chome Suginami-ku Tokyo, 168-8501 Japan
Phone
: +81 3 5370 5483
Facsimile : +81 3 5370 5492
Homepage
: http://www.iti.iwatsu.co.jp
5.4 Storage and transportation
Do not store CS-3000 in the locations below:
- Direct sunlight is received.
- With much dirt
- Corrosive gas is generated.
Conditions to store CS-3000 are as follows:
- Storage temperature: − 20 ° C to + 60 ° C
- Storage humidity: 5 % to 80 % RH (40 ° C, without dew condensation)
When transporting CS-3000, use the packing materials attached when purchasing it or equivalent.