Iwatsu CS-3000 Series, Instruction Manual

Page: 92 / 234

Capter 3
Function Setting and Basic Operation
3-46 Curve Tracer CS-3000 Series Instruction Manual
3.10 Setting DISPLAY part menus
MENU key in Section 3.10.1 explains the waveform interpolation and dot selection using VECTOR,
averaging the characteristic curve data using AVERAGE, the persistence display selection using
PERSISTENCE, ON/OFF of REF waveform display using REF VIEW, and capturing REF waveform
in the internal memory using SAVE REF.
INVERT key in Section 3.10.2 explains ON/OFF of a reversely displayed waveform.
VIEW/PULSE key in Section 3.10.3 explains TRACE selection when measured values are used for
vertical and horizontal axes and WAVE selection when a measured value is used for the vertical
axis and a time is used for the horizontal axis, the pulse width and measurement point for pulse
measurement.
CURSOR key in Section 3.10.4 explains use of DOT/fLINE/WINDOW cursors when measuring
β
(DC current amplification factor), gm (trans conductance), and Ω (resistance) of characteristic
curves.
ZOOM key in Section 3.10.5 explains the magnification ratio of VERTICAL and HORIZONTAL
(OFF
→× 2 →× 5 →× 10).
POSITION key in Section 3.10.6 explains how to set the origin to an arbitrary position in
TRACE/WAVE waveforms.
∗ For HORIZONTAL and VERTICAL knobs, see Section 3.9.
3.10.1 MENU key
3.10.2 INVERT key
3.10.3 VIEW/PULSE key
3.10.4 CURSOR key
3.10.5 ZOOM key
3.10.6 POSITION key