Iwatsu CS-3000 Series Instruction Manual Download Page 19

Page: 19 / 234

Capter 2

Name and Function of Each Part (Outline)

Curve Tracer CS-3000 Series Instruction Manual

2-1

Capter 2

Name and Function of Each Part (Outline)

This section outlines the name and the function of each part in this instrument.

Section 2.1 and Section 2.2 briefly explain names and functions of keys and connections on the front

and rear panels.

Section 2.3 to Section 2.10 briefly explain names and functions of parts on the test fixture and the

test adapter.

2.1 Name and outline of each part on front panel

Figure 2.1 shows the front panel of CS-3200/3300 (This instrument does not have HIGH CURRENT

part

⑧

) and Table 2.1 lists name and function of each part.

Figure 2.1 Front panel

Table 2.1 Name and function of each part on front panel

№

Name

Description

①

LCD screen

8.4-inch color LCD. It displays various setting screens and menus.

②

Power supply switch

It switches On/Standby.

③

USB terminal

Terminal to input/output data from/to USB memory.

It can be used for saving/recalling setup data (setting conditions) and

waveform data (TRACE/REF), and screen hard copy. (For handling USB

memory, see Section 3.11.)

④

Input/output terminals They are connected with the test fixture through the connector box.

⑤

Function keys

CLEAR key

On the right side of LCD, keys below are arranged in sequence from the

top.

•

Function keys: F1 to F6 from the top

•

CLEAR key

It is used to eliminate the function menu. However, if the submenu

appears, it allows the submenu to return to the previous menu.

⑥

Various menu keys

Various menu keys are arranged. For these keys, see Section 2.1.1 to

Section 2.1.6.

⑦

Breaker for

COLLECTOR

SUPPLY

It switches ENABLED/ DISABLED for the collector supply output with the

breaker switch (upper diagram) for protection of a measured device from

overcurrent/overvoltage. When DISABLED, the menu can be set but

nothing is generated and measured. If ENABLED, measurement can

be made.

CS-3100: only HIGH VOLTAGE

CS-3200/3300: both HIGH VOLTAGE & HIGH CURRENT

⑧

HIGH CURRENT

Included in CS-3200/3300

⑦

Breaker for COLLECTOR SUPPLY

Summary of Contents for CS-3000 Series










































































































































































































































Search results

Summary of Contents for CS-3000 Series

Reviews:

Related manuals for CS-3000 Series

Brands by name

Popular brands

Iwatsu CS-3000 Series, Instruction Manual

Search results

Summary of Contents for CS-3000 Series

Reviews:

Related manuals for CS-3000 Series

Brands by name

Popular brands