ArcticPro 200yf
en
Quick manual
D
Before connecting service hoses proceed as follows:
1.
Verify that the oil system type matches between the actual vehicle A/C system and current configuration of the ACS unit
(PAG or POE). If required change oil type in “
Settings
>>
A/C Service Parameters
” (see operating instructions chapter 4.4).
2.
Perform refrigerant identification (see operating instructions chapter 6.3).
D
Use of a refrigerant identifier reduces the risk of contamination of ArcticPro 200yf. If the service hoses are connected to the vehicle
before refrigerant identification there is the risk for contamination of the refrigerant system of ArcticPro 200yf. The contamination in
the ArcticPro 200yf can only be removed by a service provider at additional cost.
1. Menu overview
Menu level 1
Menu level 2
Menu level 3
Menu level 4
Vehicle A/C Service
Automatic A/C Service
Direct parameter input
From vehicle database
From last 10 vehicles
Manual A/C Service
Recovery
Vacuum creation
Recharge oil
Recharge UV dye
Recharge R1234yf
A/C system flushing
Short flushing
Extended Flushing
Refrigerant Identification
Maintenance
Internal bottle fill
Hose Drain
System leak test
Service report
Last 3 system service reports
Self test report
R1234yf report
Error report
Statistics
Operating hour meter
Filter drier life
Vacuum pump oil life
Maintenance
Self test
Calibration
Scale calibration
Tare Reset
R1234yf calibration check
Firmware update
Settings
General settings
Languages
Date and Time
Workshop Data
System settings
Printer
Workshop details on printout
Buzzer
Operator list
Maximum service data records
A/C Service Parameters
PAG oil
POE oil
My database
Reset factory settings
