Reference Code
Description/Action Perform all actions before exchanging Failing Items
Failing Item
0202
Unrecoverable read error
Restore the Licensed Internal Code using “Licensed Internal Code Install
and Restore” in the
iSeries Service Functions
information.
0210
The system ASP has run out of disk storage
The out of storage condition in the system ASP can be caused by an
allocation failure in some other system software. This could be a looping
condition that continues to allocate storage. Conact your service
representative for assistance with the Main Storage Dump.
0244, 0255, 0266
Contact was lost with the device indicated
Do not power off the system.
Perform LIC-PIP13.
FI00580
FI00500
FI00302
FI00301
AJDG301
0277
A compression disk unit cannot complete an operation.
Note:
Do not power off the system when performing this procedure.
Look at the 4 leftmost characters of the Data display for word 7. These four
characters indicate the type of problem that exists and the recovery action
to perform.
If these characters are 8402 or 2002, the compression disk unit is
temporarily full of data. The command to the compression disk is being
held. When the storage subsystem controller has created sufficient space on
the compression disk unit to contain the data, the command which is being
held will be released and the system will resume normal processing. If the
system does not resume normal processing within 20 minutes, contact your
next level of support.
If these characters are 8400 or 2000, the compression disk unit is full of
data. The command to the compression disk is being held. Ask the
customer to perform the recovery actions in the
″
Disk Unit Full
Considerations
″
section of the Backup and Recovery Guide, SC41-5304.
0302
Recursion in exception handler
Perform LIC-PIP8.
AJDG301
0304
Component specific exception handler return code not valid
Perform LIC-PIP8.
AJDG301
0305
Exception while storage management lock is held
Perform LIC-PIP8.
AJDG301
0308
LIC exception code detected a problem
Component Specific Exception Handler recursion is detected in an OS/400
process.
Perform LIC-PIP8.
AJDG301
0317
Traceback for code not found
Perform LIC-PIP8.
AJDG301
0323 to 0329
LIC exception code detected a problem
Perform LIC-PIP8.
AJDG301
B6xx (including A6xx)
264
iSeries: iSeries 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Analyze Hardware Problems (System Reference
Codes)
