Reference Code
Description/Action Perform all actions before exchanging Failing Items
Failing Item
6963
Multi-adapter bridge card slot error, do not use card slot
Power control failure, do not use slot.
The card location is not available for use. The Failing Item with the card
slot error is in the Failing Item list for this reference code.
See the SLOTERR symbolic FRU for the list of messages and a further
description of the problem detected by Licensed Internal Code.
For this reference code the failing item list presented in the
″
Service Action
Log
″
can be different from the failing item list documented here. That is
due to the differences in system models and features installed.
If the
″
Service Action Log
″
is available then use the failing item list
presented there for servicing this reference code.
If the
″
Service Action Log
″
is not available then use the failing item list
documented here. By following the procedures in the symbolic FRUs listed
here you will isolate to the correct FRU list based on system model and
features installed.
6964
Multi-adapter bridge configuration change or error
Multi-adapter bridge has no IOP for the I/O adapters.
LIC detected I/O adapters under the multi-adapter bridge but did not
detect an I/O processor. The I/O adapters are not available.
See the MABRCFG symbolic FRU for the list of messages, a further
description of the problem detected by Licensed Internal Code and the
corrective action.
If there is a Linux partition in the system, any IOPs plugged into slots
owned by a Linux partition will not power on. This error will be logged.
Correct the situation by removing the IOP cards.
6965
Multi-adapter bridge configuration change or error
Card type not supported in this slot.
An I/O processor or I/O adapter card type is installed in the location
indicated in word 7 of the SRC. The card type is not supported in that slot
under the Multi-adapter bridge. The card is unavailable.
See the MABRCFG symbolic FRU for the list of messages, a further
description of the problem detected by Licensed Internal Code and the
corrective action.
6966
Multi-adapter bridge configuration change or error
I/O processor removed from multi-adapter bridge card slot.
On the previous IPL an I/O processor was in the card location specified in
word 7 of the SRC. The I/O processor was not detected on this IPL.
See the MABRCFG symbolic FRU for the list of messages, a further
description of the problem detected by Licensed Internal Code and the
corrective action.
B6xx (including A6xx)
280
iSeries: iSeries 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Analyze Hardware Problems (System Reference
Codes)
