Reference Code
Description/Action Perform all actions before exchanging Failing Items
Failing Item
7200
A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. An error condition was encountered when communicating with
the load source IOP for the partition identified in the xx field of the B2xx
SRC.
8081
A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. An internal LIC timeout has occurred. The partition may
continue to IPL but it may experience problems while running.
8105
A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. There was a failure loading the VPD areas of the secondary
partition. The load-source media has been corrupted. A SLIP install of the
partition is required.
8107
A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. There was a problem getting a segment of main storage in the
Primary partition’s main store.
8115
A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. There was a low level partition to partition communication
failure. A secondary partition re-IPL is necessary to recover.
If this SRC appears again when the partition is re-IPLed contact your next
level of support.
F000
A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. An operation has timed out. Look in the Service Action Log of
the Primary partition for a failure during the last IPL of the secondary
partition. Use the new SRC and go to RCT. If you do not find a failure in
the Service Action Log from the last IPL of the partition then record all
words of this SRC and call your next level of support. See the
iSeries Service
Functions
information.
F001
A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. A bus time out occurred on a command to the load source IOP.
F002
A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. Timeout waiting for the load source hardware driver.
Initiate a main store dump of secondary partition.
F003
A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. Partition processors did not start LIC within the timeout
window.
B2xx
232
iSeries: iSeries 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Analyze Hardware Problems (System Reference
Codes)
