Reference Code
Description/Action Perform all actions before exchanging Failing Items
Failing Item
69CF
Abnormal or unexpected HSL OptiConnect disconnection from a remote
system or partition.
LIC internal error. All systems participating in HSL OptiConnect will be
disconnected. The system must be re-IPL’d to recover. Before re-IPL’ing the
system initiate a main store dump.
After getting the dump, examine the Service Action Log (SAL) on the local
system or partition for HSL Opticonnect failures that occurred at
approximately the same time this error occurred.
Examine the remote systems or partitions for problems. Examine the
Service Action Log (SAL) on the remote systems or partitions for HSL
Opticonnect problems that occurred at approximately the same time this
error occurred.
Collect all the Product Activity Log information for this failure on all
systems and partitions on this HSL loop. Be sure to record all words in the
SRCs. Contact your next level of support with the information you have
collected.
AJDG301
69D0
Bus Expansion Adapter card failed
An internal error was detected on a local optical link card.
Perform BUS-PIP1.
FI00182
FI00055
AJDG301
69D8
Bus Expansion Adapter failed
A primary optical link had a failure. Contact with the bus may still be
possible through this link or through a redundant link.
Perform BUS-PIP1.
For this reference code the failing item list presented in the
″
Service Action
Log
″
can be different from the failing item list documented here. That is
due to the differences in system models and features installed.
If the
″
Service Action Log
″
is available then use the failing item list
presented there for servicing this reference code.
If the
″
Service Action Log
″
is not available then use the failing item list
documented here. By following the procedures in the symbolic FRUs listed
here you will isolate to the correct FRU list based on system model and
features installed.
FI00182
FI00203
FI00055
LBUSADP
AJDG301
69E0
Bus Expansion Adapter card failed
An internal error was detected on a remote bus adapter card.
Perform BUS-PIP1.
FI00203
AJDG301
69E8
Bus Expansion Adapter failed
Redundancy has been lost due to a secondary optical link failure. Contact
with the bus may still be possible through the primary optical link.
Perform BUS-PIP1.
FI00203
FI00205
FI00057
AJDG301
B6xx (including A6xx)
System Reference Codes
293
