Failing Item
Description
Document Description
SIIOADP
High Speed Link (SI) I/O adapter, high level
symbolic
Problem Analysis; Symbolic FRU Isolation
SIRGCFG
SI ring invalid configuration
Problem Analysis; Symbolic FRU Isolation
SIRSTAT
System Interconect ring status
Problem Analysis; Symbolic FRU Isolation
SI_CARD
HSL (SI) controller card on a system unit
Problem Analysis; Symbolic FRU Isolation
SI_PHB
PCI host bridge adapter, high level symbolic
Problem Analysis; Symbolic FRU Isolation
SLOTERR
Multi-adapter bridge slot error
Problem Analysis; Symbolic FRU Isolation
SPNLCRD
SPCN panel card
Problem Analysis; Symbolic FRU Isolation
STORIOA
Active I/O processor
Problem Analysis; Symbolic FRU Isolation
SVCDOCS
Customer engineer directed to system problem
analysis
Problem Analysis; Symbolic FRU Isolation
SVCPROC
Service Processor
Problem Analysis; Symbolic FRU Isolation
SYSBKPL
System unit backplane
Problem Analysis; Symbolic FRU Isolation
TWRBKPL
FC 5075 I/O tower backplane
Problem Analysis; Symbolic FRU Isolation
TWRCARD
SPCN failing component in HSL I/O tower
Problem Analysis; Symbolic FRU Isolation
TWRPLNR
FC 5074, FC 9074, FC 9079 I/O tower PCI card
planar
Problem Analysis; Symbolic FRU Isolation
UG3USR1
Operator response required
(C1xx) Service Processor IPL Status Reference Code
This is a normal reference code during the IPL of the system. You may suspect that
the IPL is not advancing correctly when the 6 rightmost characters do not change
for 2 minutes. The IPL may take longer with more I/O units and main storage.
Perform the the
″
IPL Status SRCs
″
procedure in the
iSeries Service Functions
if you
suspect a problem.
If, after performing that procedure, there is still a problem, ask your next level of
support for assistance.
This ends the procedure.
(D1xx 3xxx) Service Processor Main Storage Dump Status Reference
Code
This is a normal reference code showing the status of the system when performing
a main storage dump. You may suspect that the system is not operating correctly
when the rightmost characters do not change for 2 minutes.
Note:
It takes approximately 1 minute to dump each 20MB of main storage. For
more information on main storage dumps, see
″
Working with Storage
Dumps
″
in the
iSeries Service Functions
information.
B6xx (including A6xx)
298
iSeries: iSeries 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Analyze Hardware Problems (System Reference
Codes)
