Huawei E9000, User Manual

Page: 164 / 189

NO TICE
l Before adding switch modules, contact Huawei technical support engineers to determine
the networking configuration based on site requirements.
l If switch modules are added, the corresponding NICs of the compute nodes must be added.
l Use the Huawei Server Power Calculator to determine the quantity and configuration
policies of PSUs. For details about PSU configuration policies, see 2.5.4 PSU
Configuration Policies .
l Determine whether to add fan modules according to the quantity of compute nodes after
capacity expansion. Fan modules are configured based on the following guidelines:
– When a chassis houses eight or fewer half-width compute nodes, or four or fewer
full-width compute nodes, install fan modules in slots 1, 2, 3, 4, 7, 8, 9, 10, 13, and
14.
– When a chassis houses more than eight half-width compute nodes or more than four
full-width compute nodes, fully configure fan modules.
Table 8-1 Determining the modules to be added
Module Type Model Quantity
Compute node - -
Switch module - -
Fan module - -
PSU - -
Step 2 Install the modules to be added. For details, see 3 Installing the E9000 .
Step 3
Log in to the MM910 WebUI and click the expansion modules and existing modules to view
and record their software versions.
Figure 8-1 MM910 WebUI
E9000 Server
User Guide
8 Expanding the E9000 Capacity
Issue 25 (2019-11-30) Copyright © Huawei Technologies Co., Ltd. 154