Figure 6-38
Removing a PSU (taking an AC PSU as an example)
6.
Horizontally pull out the PSU from the chassis. See (2) in
.
NO TICE
Each ESD bag should hold only one PSU.
7.
Place the removed PSU into an ESD bag.
Step 3
Install a new PSU.
1.
Unpack the PSU packing case.
2.
Take the PSU out of its ESD bag.
3.
Horizontally insert the PSU into the chassis until the PSU snaps into the chassis.
Install the PSUs according to the following guidelines:
–
For the PSUs on the left side in the rear view of the chassis, install them with the
latches on the upper side.
–
For the PSUs on the right side in the rear view of the chassis, install them with the
latches on the lower side.
E9000 Server
User Guide
6 Parts Replacement
Issue 25 (2019-11-30)
Copyright © Huawei Technologies Co., Ltd.
136
