Huawei E9000, User Manual

Page: 103 / 189

User
Name User Description Default
Passwo
rd User
Type User
Status Login
Method
ntp A user of the Network Time
Protocol (NTP) daemon.
The NTP daemon
automatically synchronizes
the system time with an
accurate time source over the
Internet.
apache A user of the apache service.
nobody An anonymous user.
The
nobody account requires
no special permissions to
allocate software processes.
telnetd A user of the Telnet service.
You must manually enable
this user.
snmpuser
_for_start
_snmpd_
program A user of the SNMPD
process.
Default Information of Pass-Through Modules
Table 5-3 Default information of the CX116, CX317, and CX318
User
Name User Description Default
Passwo
rd User
Type User
Status Login
Method
root A BMC user. Huawei
12#$ Administra
tor Enabled Remote
login
Default Information of Switch Modules
The default information of switch modules is as follows:
l
The default information of the CX110, CX111, CX310, CX710, and CX920 is listed in
Table 5-5 . These switch modules do not support FCoE gateways or FC switching planes.
l The default information of the CX210 and CX220 is listed in Table 5-5 . These switch
modules do not support BIOS Setup menus or Ethernet switching planes.
l For the CX910, CX911, CX912, and CX913 whose software version is V100R001C00
or V100R001C00
SPCxxx at the Support > Intelligent Servers > Blade Servers >
E9000 Server
User Guide
5 Configuring the E9000
Issue 25 (2019-11-30) Copyright © Huawei Technologies Co., Ltd. 93