Step 3
Connect a GE network cable or serial cable.
Figure 3-56
Connecting a GE network cable or serial cable
l
The serial ports and GE electrical ports are standard RJ-45 ports, which are connected in the same
way.
l
Before installing a network cable to a network port, check that the network cable connector is intact
and the pins have no sundries or deformation.
Step 4
Lay out and bind GE network cables and serial cables.
NO TICE
The Ethernet signal cables connecting cabinets do not support EMS. According to EMC
requirements, the distance between the power cables and signal cables must be at least 100
mm (3.94 in.).
1.
Lay out the signal cables neatly along the cable organizers, bind the signal cables using
cable ties, and use diagonal pliers to trim off the excess ends of cable ties so that there
are no rough edges.
E9000 Server
User Guide
3 Installing the E9000
Issue 25 (2019-11-30)
Copyright © Huawei Technologies Co., Ltd.
85
