Huawei E9000, User Manual

Page: 79 / 189

2. Completely open the ejector lever on the filler panel. See (2) in Figure 3-31 .
3. Pull out the filler panel from the chassis. See (3) in Figure 3-31 .
4. Close the ejector lever on the filler panel. See (4) in Figure 3-31 .
5. Place the removed filler panel in an accessory recycling bin.
Step 4 Install the compute node.
1. (Optional) Install a partition board. Perform this operation only when no partition board
is installed between two half-width compute node slots.
a. Tilt the partition board and insert it into the chassis. Align the partition board with
the mounting holes and then make the partition board upright. See (1) and (2) in
Figure 3-32 .
Figure 3-32 Installing a partition board
b. Pull the partition board outwards until it clicks into place. See (3) and (4) in Figure
3-32 .
2. Press the ejector release button on the half-width compute node. See (1) in Figure 3-33 .
E9000 Server
User Guide
3 Installing the E9000
Issue 25 (2019-11-30) Copyright © Huawei Technologies Co., Ltd. 69