111
Elmark Automatyka S.A.
ul. Niemcewicza 76, 05-075 Warszawa, tel. (+48) 22 773 79 37; [email protected]; www.elmark.com.pl
NIP: 5252072585; KRS: 0000803828, Sąd Rejonowy dla M-St. Warszawy, XIV Wydział Gosp. KRS; Kapitał Zakładowy 525.000 zł, w pełni opłacony
Function
Code
Parameter
Name
Setting Range
Default
Property
P9.10
M01 action
During fault auto
reset
0: No act
1:Act
0
☆
P9.11
Time interval of
fault auto reset
0.1s ~ 100.0s
1.0s
☆
P9.12
Reserved
☆
P9.13
Output phase loss
protection
selection
0: Disabled
1: Enabled
1
☆
P9.14
1st fault type
0: No fault
1: Inverter unit protection
2: Overcurrent during acceleration
3: Overcurrent during deceleration
4: Overcurrent at constant speed
5: Overvoltage during acceleration
6: Overvoltage during deceleration
7: Overvoltage at constant speed
8: Buffer resistance overload
9: Undervoltage
10: AC drive overload
11: Motor overload
12: Reserved
13: Power output phase loss
14: Module overheat
15: External equipment fault
16: Communication fault
17: Contactor fault
18: Current detection fault
19: Motor auto-tuning fault
20: Reserved
21: EEPROM read-write fault
22: AC drive hardware fault
23: Short circuit to ground
24: Reserved
25: Reserved
26:Accumulative running time reached
27: Reserved
28: Reserved
29: Accumulative power-on time reached
30: Load becoming 0
31: PID feedback lost during running
40: With-wave currant limit fault
41-43: Reserved
51: Reserved
-
•
P9.15
2nd fault type
-
•
P9.16
3rd (latest) fault
type
-
•
P9.17
Frequency upon
3rd fault
-
-
•
P9.18
Current upon 3rd
fault
-
-
•
Summary of Contents for elmatic ED2000
Page 1: ......
