6
Elmark Automatyka S.A.
ul. Niemcewicza 76, 05-075 Warszawa, tel. (+48) 22 773 79 37; [email protected]; www.elmark.com.pl
NIP: 5252072585; KRS: 0000803828, Sąd Rejonowy dla M-St. Warszawy, XIV Wydział Gosp. KRS; Kapitał Zakładowy 525.000 zł, w pełni opłacony
Item
ED2000
Sta
n
d
ar
d
fu
n
ctio
n
s
Instantaneous stop
doesn't stop
The load feedback energy compensates the voltage reduction so that the AC drive
can continue to run
for a short time.
Rapid current limit It helps to avoid frequent over current faults of the AC drive.
High performance
Control of asynchronous motor is implemented through the high-performance
current vector control technology.
Timing control
Time range: 0.0-8500.0 minutes
Communication
methods
RS485
Running
command channel
Given by the panel, control terminals,
Serial communication port, can be switched by many
ways
Frequency source
10 kinds of frequency source, given by
Digital analog voltage, analog current, Pulse, serial port. can be switched by many
ways
Auxiliary frequency
source
10 kinds of Frequency source, can easily realize Micro adjustment, frequency
Synthesizer
In
p
u
ts
a
n
d
o
u
tp
u
t
Input terminals
6 digital Input terminals, one of which supports up to
100 kHz high-11peed pulse input (optional).
2 analog input terminal, one of which only supports 0-10V voltage input and the
other supports 0-10 V
voltage input or 4-20 mA current input.
Output terminal
1 digital output terminal
1 relay output terminal
1 analog output terminal: that supports 0-20mA current output or 0-10 V voltage
output
Op
era
tio
n
o
n
t
h
e
o
p
era
tio
n
p
an
el
LED display
It displays the parameters.
Key locking and
function selection
It can lock the keys partially or completely end define the function range of some
keys so as to prevent mi&-function.
Protection mode
Motor short-circuit detection at power-on, output phase loss protection, over-
current protection, over-voltage protection, under voltage protection, overheat
protection and overload protection.
En
viron
m
en
t
Installation location
Indoor, avoid direct sunlight, dust, corrosive gas, combustible gas, oil smoke, vapor,
drip or salt.
Altitude
Lower than 1000m (Lower the grades when using higher then 1000m)
Ambient
temperature
-
10⁰C ~ 40⁰C (Lower the grades if the ambient
temperature is between 40⁰C end 50⁰C)
Humidity
Less than 95%RH, without condensing
Vibration
Less than 5.9 m/s2 (0.6 g)
Storage
temperature
-
20⁰C ~ 60⁰C
Summary of Contents for elmatic ED2000
Page 1: ......
