ICS-2100 Installation Instructions
86
Doc. 065294-01 3/09
7.
Slide the EluGen cartridge down into the
holder until it stops (see
sure the cable remains out of the holder.
NOTE To avoid crimping the lines, do not
twist the cartridge when you slide
it into the holder. The lines are
designed to coil inside the holder.
Figure 87. EluGen Cartridge Installed in the Holder
8.
Remove the plug from
the
EGC-1
connector on
top of the ICS-2100.
9.
Orient the cartridge’s
blue 4-pin electrical
cable connector as
shown in
Push it onto the
EGC-1
connector on the ICS-
2100. Twist the ring on
the cable connector
fingertight to secure it.
Figure 88. Connecting the EluGen Cartridge Cable
