Setting Up Chromeleon
Doc. 065294-01 3/09
21
12.2
Configuring the Device Properties
NOTE For details about the settings on any of the
Properties tab pages, click the Help button.
1. Click the
Options
tab and verify that the options installed in your IC
system are enabled.
To configure an auxiliary power supply (optional):
To operate an electrolytic device such as a water polisher, you can
configure the EGC-2 power supply as an auxiliary power supply. The
power supply operates in constant current mode and can be
configured from 0 to 200 mA, with a maximum voltage of 35 V.
•
On the Options tab page, select the
AuxPower Supply
check box
) and enter the
Maximum Current
allowed for the
Figure 20. Example Properties Dialog Box: Options Tab Page
