Dionex ICS-2100, Installation Instructions Manual

Page: 7 / 110

Unpacking the IC System
Doc. 065294-01 3/09
3
3. Set the eluent bottle on top of
the ICS-2100 (see Figure 3 )
.
4. TURN OVER THE EGC
HOLDER
, and set it on top
of the ICS-2100.
Figure 3. ICS-2100 After Installing
Eluent Bottle and EGC Holder
5. Remove the next layer of
foam and remove the Ship Kit
(P/N 064375) (see
Figure 4 ).
6. The bottom layer of foam has
two cutouts on either side of
the module; use these as
handholds when lifting the IC
system.
Figure 4. IC System with Ship Kit
7. Lift the IC system off the bottom layer of foam and out of the box. Set it on a
workbench.
Two or more persons should lift the IC system, which weighs 30 kg
(66 lb). Lift the IC system only from each side of the cabinet bottom.
Lifting from the front door will damage the door hinges.
Au moins deux personnes peuvent soulever le chromatograph
ionique: il pèse 30 kg (66 lb). Ne soulevez le chromatograph ionique
que par chaque côté du fond de l'armoire. Son soulèvement par la
porte du panneau avant endommagera les charnières de la porte.
EGC Holder
(right-side up)
Ship
Kit