Verifying Operational Status
Doc. 065294-01 3/09
99
c.
Verify that the
Channel_Pressure
check box is selected (see
Figure 99. Pump Pressure Channel Enabled
2. Display the pressure channel plot on the Chromeleon panel:
a.
Right-click anywhere on the plot section of the panel.
b. Click
Signals
.
c.
Under
Available Signals,
select
Channel_Pressure
and click
Add >>
to
move the signal to the
Displayed Signals
list (see
OK
.
Pump pressure readings will now be plotted during data acquisition (along
with the detector signals).
Figure 100. Online Signal Plot Properties
