ICS-2100 Installation Instructions
22
Doc. 065294-01 3/09
electrolytic device (refer to the documentation provided with the
device).
•
Connect the device to the
EGC-2
connector on top of the ICS-
2100.
After the auxiliary power supply is configured, information about the
power supply (current, on, off, etc.) is displayed in Chromeleon and
on the front panel touch screens.
2. Click the
Inject Valve
tab and verify that the correct device is
assigned to control the injection valve in the ICS-2100.
•
If the timebase will include an AS or AS-DV, the
Controlled By
setting for
Pump_InjectValve
must be
AS
Figure 21. Inject Valve Properties: Inject Valve Controlled by the AS
