Connecting to the Chromeleon PC
Doc. 065294-01 3/09
13
9.
Connecting to the Chromeleon PC
The IC system rear panel provides a USB receptacle for connecting to a USB port
on the Chromeleon PC. The rear panel also provides two USB ports for
connecting other Dionex USB-compliant modules to the system.
9.1
Connecting the IC System to the PC
1. Locate the USB cable (P/N 960779) in the IC system Ship Kit.
2. Plug the cable’s “A” connector into a USB port on the Chromeleon
PC and plug the cable’s “B” connector into the USB receptacle
(labeled
FROM PC
) on the IC system rear panel (see
).
Do not turn on the power to the ICS-2100 or other USB module(s) until
after you connect the USB cable.
Before connecting the USB cable, verify that Chromeleon is installed.
If not, Windows will be unable to identify the new USB device when
the power is turned on. To install Chromeleon, see
.
Figure 13. Example USB Connections: One IC System Connected to the PC
USB Cable
A
B
IC
System
PC