ICS-2100 Installation Instructions
60
Doc. 065294-01 3/09
3.
Pull the
TO CR-TC REGEN IN
line (orange label) out of the opening on
the side of the holder.
4.
Thread the three extended lines (red, yellow, and blue labels) through
the opening on the side of the holder (see
5. Turn the EGC holder right-side up and set it back into position.
6. Orient the EluGen
cartridge with the fittings
facing up and remove the
plugs from the cartridge
INLET
and
OUTLET
Figure 60. EluGen Cartridge Fitting Plugs
Figure 59. TO CR-TC/EPM Lines Outside of Holder
TO CR-TC/EPM
ELUENT OUT
(yellow label)
TO CR-TC/EPM
ELUENT IN
(red label)
TO CR-TC/EPM
REGEN OUT
(blue label)
OUTLET
INLET
