DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
821
To upload the attack log from the Switch to the TFTP server:
DGS-3000-26TC:admin#upload attack_log_toTFTP 10.90.90.10 dest_file
d:\attack.txt
Command: upload attack_log_toTFTP 10.90.90.10 dest_file d:\attack.txt
Success.
DGS-3000-26TC:admin#
config tftp
86-3
Description
This command is used to configure the TFTP server and file pathname on the TFTP server.
Format
config tftp {server <ipaddr> | firmware_file <path_filename 64> | cfg_file <path_filename 64>
| log_file <path_filename 64> | attack_log_file <path_filename 64> | certificate_file
<path_filename 64> | key_file <path_filename 64> | tech_support_file <path_filename 64> |
debug_error_log_file <path_filename 64> | sim_firmware_file <path_filename 64> |
sim_cfg_file <path_filename 64> | sim_log_file <path_filename 64>}(1)
Parameters
server
- Specify the IP address of the TFTP server.
<ipaddr>
- Enter the IP address of the TFTP server.
firmware_file
- Specify the path and name of the firmware file that will be used for the upload
and download.
<path_filename 64>
- Enter the path and name of the firmware file that will be used for the
upload and download. This name can be up to 64 characters long.
cfg_file
- Specify the path and name of the configuration file that will be used for the upload and
download.
<path_filename 64>
- Specify the path and name of the configuration file that will be used for
the upload and download. This name can be up to 64 characters long.
log_file
- Specify the path and name of the system log file that will be used for the upload and
download.
<path_filename 64>
- Enter the path and name of the system log file that will be used for the
upload and download. This name can be up to 64 characters long.
attack_log_file
- Specify the path and name of the attack log file that will be used for the upload
and download.
<path_filename 64>
- Enter the path and name of the attack log file that will be used for the
upload and download. This name can be up to 64 characters long.
certificate_file
- Specify the path and name of the SSL certificate file that will be used for the
upload and download.
<path_filename 64>
- Enter the path and name of the SSL certificate file that will be used for
the upload and download. This name can be up to 64 characters long.
key_file
- Specify the path and name of the SSL certificate key file that will be used for the
upload and download.
<path_filename 64>
- Enter the path and name of the SSL certificate key file that will be used
for the upload and download. This name can be up to 64 characters long.
tech_support_file
- Specify the path and name of the technical support file that will be used for
the upload.
<path_filename 64>
- Enter the path and name of the technical support file that will be used
for the upload. This name can be up to 64 characters long.
Summary of Contents for DGS-3000 series
Page 1: ......