DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
877
DGS-3000-26TC:admin# show wac auth_state ports
Command: show wac auth_state ports
P:Port-based Pri:Priority
Port MAC Address Original State VID Pri Aging Time/ Idle
RX VID Block Time Time
------ -------------------- ---- -------------- ---- -- ----------- ----
31 00-05-5D-F9-16-76 1 Authenticating - - 27 -
Total Authenticating Hosts : 1
Total Authenticated Hosts : 0
Total Blocked Hosts : 0
DGS-3000-26TC:admin#
clear wac auth_state
95-17
Description
This command is used to clear the authentication state of a port. The port will return to un-
authenticated state. All the timers associated with the port will be reset.
Format
clear wac auth_state [ports [<portlist> | all] {authenticated | authenticating | blocked} |
macaddr <macaddr>]
Parameters
ports
- Specify the list of ports whose WAC state will be cleared.
<portlist>
- Enter a range of ports.
all
- Specify to clear all ports.
authenticated
- (Optional) Specify to clear all authenticated users for a port.
authenticating
- (Optional) Specify to clear all authenticating users for a port.
blocked
- (Optional) Specify to clear all blocked users for a port.
macaddr
- Specify to clear a specific user.
<macaddr>
- Enter the MAC address here.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To clear the WAC authentication state of ports 1 to 5:
Summary of Contents for DGS-3000 series
Page 1: ......
