DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
848
Format
show iproute {<network_address> | <ipaddr>} {static}
Parameters
<network_address>
- (Optional) Enter the destination network address of the route to be
displayed.
<ipaddr>
- (Optional) Enter the destination IP address of the route to be displayed. The longest
prefix matched route will be displayed
static
- (Optional) Specify to display only static routes. One static route may be active or inactive.
Restrictions
None.
Example
To display the contents of the IP routing table:
DGS-3000-26TC:admin#show iproute
Command: show iproute
Routing Table
IP Address/Netmask Gateway Interface Cost Protocol
------------------ --------------- ------------ -------- --------
10.1.1.0/24 0.0.0.0 System 1 Local
192.168.1.0/24 0.0.0.0 ip1 1 Local
Total Entries : 2
DGS-3000-26TC:admin#show iproute static
Command: show iproute static
Routing Table
IP Address/Netmask Gateway Cost Protocol Backup Status
------------------ ------------- ----- -------- -------- ------
0.0.0.0/0 10.1.1.11 1 Default Primary Active
100.1.1.0/24 10.1.1.11 1 Static Primary Active
101.1.1.0/24 10.1.1.12 1 Static Primary Inactive
102.1.1.0/24 tn1 1 Static Primary Inactive
103.1.1.0/24 tn2 1 Static Primary Active
Total Entries : 5
DGS-3000-26TC:admin#
Summary of Contents for DGS-3000 series
Page 1: ......
