DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
728
Format
config ssh user <username 15> authmode [hostbased [hostname <domain_name 32> |
hostname_IP <domain_name 32> [<ipaddr> | <ipv6addr>]] | password | publickey]
Parameters
<username 15>
- Enter the user name. This name can be up to 15 characters long.
authmode
- Specify the authentication method.
hostbased
- Specify user authentication method.
hostname
- Specify host domain name.
<domain_name 32>
- Enter the domain name here. This name can be up to 32
characters long.
hostname_IP
- Specify host domain name and IP address.
<domain_name 32>
- Enter host name if configuring Host-based method.
<ipaddr>
- Enter host IP address if configuring Host-based method.
<ipv6addr>
- Enter host IPv6 address if configuring Host-based method.
password
- Specify user authentication method.
publickey
- Specify user authentication method.
Restrictions
Only Administrators can issue this command.
Example
To update user “test” authentication method:
DGS-3000-26TC:admin#config ssh user test authmode publickey
Command: config ssh user test authmode publickey
Success.
DGS-3000-26TC:admin#
show ssh user authmode
74-6
Description
This command is used to show the SSH user information.
Format
show ssh user authmode
Parameters
None.
Restrictions
Only Administrators can issue this command.
Summary of Contents for DGS-3000 series
Page 1: ......