DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
248
Parameters
<pool_name 12>
- Enter the name of the DHCP pool.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To create a DHCP pool:
DGS-3000-26TC:admin#create dhcp pool nyknicks
Command: create dhcp pool nyknicks
Success.
DGS-3000-26TC:admin#
create dhcp pool manual_binding
21-8
Description
This command is used to specify the distinct identification of the client in dotted-hexadecimal
notation or hardware address.
An address binding is a mapping between the IP address and MAC address of a client. The IP
address of a client can be assigned manually by an administrator or assigned automatically from a
pool by a DHCP server.
The IP address specified in the manual binding entry must be in a range within that the network
uses for the DHCP pool. If the user Specify a conflict IP address, an error message will be
returned. If a number of manual binding entries are created, and the network address for the pool
is changed such that conflicts are generated, those manual binding entries which conflict with the
new network address will be automatically deleted.
Format
create dhcp pool manual_binding <pool_name 12> <ipaddr> hardware_address <macaddr>
{type [ethernet | ieee802]}
Parameters
<pool_name 12>
- Enter the DHCP pool name.
<ipaddr>
- Enter the IP address which will be assigned to a specified client.
hardware_address
- Specify the hardware MAC address.
<macaddr>
- Enter the MAC address here.
type
- (Optional) Specify the DHCP pool manual binding type. If it's not specified, the type will be
“ethernet".
ethernet
- Specify Ethernet type.
ieee802
- Specify IEEE 802 type.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Summary of Contents for DGS-3000 series
Page 1: ......