DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
842
Chapter 91
Trusted Host Command List
create trusted_host
[<ipaddr> | <ipv6addr> | network <network_address> | ipv6_prefix
<ipv6networkaddr>] {snmp | telnet | ssh | http | https | ping}
delete trusted_host
[ipaddr <ipaddr> | ipv6address <ipv6addr> | network <network_address> |
ipv6_prefix <ipv6networkaddr > | all]
config trusted_host
[<ipaddr> | <ipv6addr> | network <network_address> | ipv6_prefix
<ipv6networkaddr>] [add | delete] {snmp | telnet | ssh | http | https | ping | all}
show trusted_host
create trusted_host
91-1
Description
This command is used to create the trusted host. The switch allows you to specify up to ten IPv4
and IPv6 addresses that are allowed to manage the Switch via in-band SNMP, Telnet or WEB
based management software. These IPv4 or IPv6 addresses must be members of the
Management VLAN. If no IPv4 or IPv6 addresses are specified, then there is nothing to prevent
any IPv4 or IPv6 addresses from accessing the Switch, provided the user knows the Username
and Password.
When the access interface is not specified, the trusted host will be created for all interfaces.
Format
create trusted_host [<ipaddr> | <ipv6addr> | network <network_address> | ipv6_prefix
<ipv6networkaddr>] {snmp | telnet | ssh | http | https | ping}
Parameters
<ipaddr>
- Enter the trusted host IP address.
<ipv6addr>
- Enter the trusted host IPv6 address.
network
- The network address of the trusted network. The network address takes the form of:
xxx.xxx.xxx.xxx/y. Where “x” represents an IP number.
<network_address>
- Enter the network address used here.
ipv6_prefix
- Specify that IPv6 prefix here.
<ipv6networkaddr>
- Enter the IPv6 network address here.
snmp
- (Optional) Specify trusted host for SNMP.
telnet
- (Optional) Specify trusted host for TELENT.
ssh
- (Optional) Specify trusted host for SSH.
http
- (Optional) Specify trusted host for HTTP.
https
- (Optional) Specify trusted host for HTTPs.
ping
- (Optional) Specify trusted host for PING.
Restrictions
Only Administrators and Operators can issue this command.
Example
To create the trusted host:
Summary of Contents for DGS-3000 series
Page 1: ......