DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
870
Format
config wac clear_default_redirpath
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To clear the WAC default redirect path:
DGS-3000-26TC:admin#config wac clear_default_redirpath
Command: config wac clear_default_redirpath
Success.
DGS-3000-26TC:admin#
config wac virtual_ip
95-8
Description
This command is used to configure the virtual IP address for WAC. The virtual IP of WAC is used
to accept authentication request from unauthenticated host. Only requests sent to this IP will get
response correctly.
This IP does not respond to ARP request or ICMP packet!
NOTE:
The WAC virtual IP address should be configured before enabling WAC because WAC will
not work correctly if the virtual IP address is not set. A warning message “Warning! WAC
virtual IPv4 or IPv6 address is not configured.” will be prompted even when enabling WAC
successfully.
Format
config wac virtual_ip {<ipaddr> | <ipv6addr>}(1)
Parameters
<ipaddr>
- Enter the IPv4 address of the virtual IP.
<ipv6addr>
- Enter the IPv6 address of the virtual IP
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Summary of Contents for DGS-3000 series
Page 1: ......