DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
193
<vlan_name 32>
- Enter the name of the VLAN here. This name can be up to 32
characters long.
vlan_id
- (Optional) Specify the VLAN ID used.
<vlanid 1-4094>
- Enter the VLAN ID used here.
source_mac
- (Optional) Specify the source MAC address.
<macaddr>
- Enter the source MAC address used for this configuration here.
destination_mac
- (Optional) Specify the destination MAC.
<macaddr>
- Enter the destination MAC address used for this configuration here.
802.1p
- (Optional) Specify the value of 802.1p priority tag.
<value 0-7>
- Enter the 802.1p priority tag value here. This value must be between 0 and
7.
ethernet_type
- (Optional) Specify the Ethernet type.
<hex 0x0-0xffff>
- Enter the Ethernet type value here.
ip
- Specify that the profile type will be IP.
vlan
- (Optional) Specify the VLAN name used.
<vlan_name 32>
- Enter the name of the VLAN here. This name can be up to 32
characters long.
vlan_id
- (Optional) Specify the VLAN ID used.
<vlanid 1-4094>
- Enter the VLAN ID used here.
source_ip
- (Optional) Specify an IP source address.
<ipaddr>
- Enter the source IP address used for this configuration here.
destination_ip
- (Optional) Specify an IP destination address.
<ipaddr>
- Enter the destination IP address used for this configuration here.
dscp
- (Optional) Specify the value of DSCP, the value can be configured 0 to 63.
<value 0-63>
- Enter the DSCP value used here.
icmp
- (Optional) Specify that the rule applies to ICMP traffic.
type
- (Optional) Specify that the rule applies to the value of ICMP type traffic.
<value 0-255>
- Enter the ICMP type value here. This value must be between 0 and
255.
code
- (Optional) Specify that the rule applies to the value of ICMP code traffic.
<value 0-255>
- Enter the ICMP code value here. This value must be between 0 and
255.
igmp
- (Optional) Specify that the rule applies to IGMP traffic.
type
- (Optional) Specify that the rule applies to the value of IGMP type traffic.
<value 0-255>
- Enter the IGMP type value here. This value must be between 0 and
255.
tcp
- (Optional) Specify that the rule applies to TCP traffic.
src_port
- (Optional) Specify that the rule applies the range of TCP source port.
<value 0-65535>
- Enter the source port value here. This value must be between 0 and
65535.
dst_port
- (Optional) Specify the range of TCP destination port range.
<value 0-65535>
- Enter the destination port value here. This value must be between 0
and 65535.
flag
- (Optional) Specify the TCP flag fields .
all
- Specify that the TCP flag field mask will be set to all.
urg
- (Optional) Specify that the TCP flag field mask will be set to urg.
ack
- (Optional) Specify that the TCP flag field mask will be set to ack.
psh
- (Optional) Specify that the TCP flag field mask will be set to psh.
rst
- (Optional) Specify that the TCP flag field mask will be set to rst.
syn
- (Optional) Specify that the TCP flag field mask will be set to syn.
fin
- (Optional) Specify that the TCP flag field mask will be set to fin.
udp
- Specify that the rule applies to UDP traffic.
src_port
- (Optional) Specify the range of UDP source port range.
<value 0-65535>
- Enter the source port value here. This value must be between 0 and
65535.
dst_port
- (Optional) Specify the range of UDP destination port mask.
<value 0-65535>
- Enter the destination port value here. This value must be between 0
and 65535.
protocol_id
- Specify that the rule applies to the value of IP protocol ID traffic.
<value 0-255>
- Enter the protocol ID value here. This value must be between 0 and 255.
Summary of Contents for DGS-3000 series
Page 1: ......