manualshive.com logo in svg

D-Link DGS-3000 series, Reference Manual

The D-Link DGS-3000 series is a high-performance networking solution designed for fast and reliable data transmission. Ensure seamless hardware installation with the comprehensive Hardware Installation Manual available for free download on our website manualshive.com. Gain easy access to the manual and unleash the full potential of your DGS-3000, hassle-free.

Share
Download
background image

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide 

892 

Category 

Event Description 

Log Information 

Severity 

  

BPDU attack happened. 

Port <port> enter BPDU under 
protection state (mode: shutdown) 

Informational 

  

BPDU attack automatically recover. 

Port <port> recover from BPDU under 
protection state automatically 

Informational 

  

BPDU attack manually recover. 

Port <port> recover from BPDU under 
protection state manually 

Informational 

  

System re-start reason: system fatal 
error. 

System re-start reason: system fatal 
error 

Emergent 

  

System re-start reason: CPU exception.  System re-start reason: CPU exception  Emergent 

JWAC 

When a client host authenticated 
successful. 

JWAC authenticated user (Username: 
<string>, IP: <ipaddr | ipv6addr>, MAC: 
<macaddr>, Port: <portNum>) 

Informational 

  

When a client host fail to authenticate. 

JWAC unauthenticated user 
(Username: <string>, IP: <ipaddr | 
ipv6addr>, MAC: <macaddr>, Port: 
<portNum>) 

Warning 

  

This log will be triggered when the 
authorized user number reaches the 
max user limit on whole device. 

JWAC enters stop learning state. 

Warning 

  

This log will be triggered when the 
authorized user number is below the 
max user limit on whole device in a 
time interval (interval is project 
depended). 

JWAC recovered from stop learning 
state. 

Warning 

WAC 

When a client host authenticated 
successful. 

WAC authenticated user (Username: 
<string>, IP: <ipaddr | ipv6address>, 
MAC: <macaddr>, Port: <portNum>) 

Informational 

  

When a client host fail to authenticate. 

WAC unauthenticated user (User 
Name: <string>, IP: <ipaddr | 
ipv6address>, MAC: <macaddr>, Port: 
<portNum>) 

Warning 

  

This log will be triggered when the 
number of authorized users reaches 
the maximum user limit on the whole 
device. 

WAC enters stop learning state. 

Warning 

  

This log will be triggered when the 
number of authorized users is below 
the maximum user limit on whole 
device in a time interval (The interval is 
project dependent). 

WAC recovered from stop learning 
state. 

Warning 

DHCPv6 Server 

 The address of the DHCPv6 Server 
pool is used up. 

The address of the DHCPv6 Server 
pool <pool-name> is used up. 

Informational 

  

  The number of allocated ipv6 
addresses of the DHCPv6 Server pool 
is equal to MAX-NUM. 

The number of allocated ipv6 
addresses of the DHCPv6 Server pool 
is equal to MAX-NUM. 

Informational 

DHCPv6 Server 
Screening 

Detected untrusted DHCPv6 server IP 
address. 

 Detected untrusted DHCPv6 server 
(IP: <ipv6addr>, Port:<portNum> ) 

Informational 

  

Detected untrusted source IP in 
ICMPv6 Router Advertisement 
Message. 

Detected untrusted source IP of 
ICMPv6 Router Advertisement 
message (IP: <ipv6addr>, 
Port:<portNum> ) 

Informational 

Y.1731 

AIS condition detected. 

AIS condition detected. MD 
Level:<mdlevel>, VLAN:<vlanid>, 
Local(Port <portNum>, 
Direction:<mepdirection>, 
MEPID:<mepid>) 

Notice 

  

AIS condition cleared. 

AIS condition cleared. MD 
Level:<mdlevel>, VLAN:<vlanid>, 
Local(Port <portNum>, 

Notice 

Summary of Contents for DGS-3000 series














































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DGS-3000 series

Accelerated 6330-MX User Manual preview
6330-MX
Brand: Accelerated Pages: 10
Accelerated 6300-CX Customer Setup Instructions preview
6300-CX
Brand: Accelerated Pages: 4
Garland P1GCCAS Installation Manual preview
P1GCCAS
Brand: Garland Pages: 4
Danfoss TFX Installation And Operation Manual preview
TFX
Brand: Danfoss Pages: 61
Yamaha mLAN Driver Manual Book preview
mLAN Driver
Brand: Yamaha Pages: 24
Yamaha DSP1D Supplementary Manual preview
DSP1D
Brand: Yamaha Pages: 5
H3C CR1606-F Installation Instructions Manual preview
CR1606-F
Brand: H3C Pages: 12
JUMO 705041 Installation Instructions Manual preview
705041
Brand: JUMO Pages: 60
Idis DR-6308P Quick Manual preview
DR-6308P
Brand: Idis Pages: 20
Ubiquiti UniFi LED ULED-AT Quick Start Manual preview
UniFi LED ULED-AT
Brand: Ubiquiti Pages: 16
Rasilient ApplianceStor 15MT User Manual preview
ApplianceStor 15MT
Brand: Rasilient Pages: 30
PaloAlto Networks ION 1000 Hardware Reference Manual preview
ION 1000
Brand: PaloAlto Networks Pages: 28
ZyXEL Communications ES-105 User Manual preview
ES-105
Brand: ZyXEL Communications Pages: 12
Brickcom NR-2008 User Manual preview
NR-2008
Brand: Brickcom Pages: 184
netsys NV-600W User Manual preview
NV-600W
Brand: netsys Pages: 243
Netstor NA762TB3 User Manual preview
NA762TB3
Brand: Netstor Pages: 17
Tektronix 7B87 Instruction Manual preview
7B87
Brand: Tektronix Pages: 143
3Com HiPer DSP Getting Started Manual preview
HiPer DSP
Brand: 3Com Pages: 17

Brands by name

Popular brands

Load more brands