manualshive.com logo in svg

D-Link DGS-3000 series, Reference Manual

The D-Link DGS-3000 series is a high-performance networking solution designed for fast and reliable data transmission. Ensure seamless hardware installation with the comprehensive Hardware Installation Manual available for free download on our website manualshive.com. Gain easy access to the manual and unleash the full potential of your DGS-3000, hassle-free.

Share
Download
background image

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide 

93 

<netmask>

 - Enter the source netmask used here. 

destination_ip

 - (Optional) Specify an IP destination address. 

<ipaddr>

 - Enter the destination IP address used for this configuration here. 

mask

 - (Optional) Specify an additional mask parameter that can be configured. 

<netmask>

 - Enter the destination netmask used here. 

dscp

 - (Optional) Specify the value of DSCP. The DSCP value ranges from 0 to 63. 

<value 0-63>

 - Enter the DSCP value here. 

icmp

 - (Optional) Specify to configure the ICMP parameters. 

type

 - (Optional) Specify that the rule will apply to the ICMP Type traffic value. 

<value 0-255>

 - Enter the ICMP type traffic value here. This value must be between 0 

and 255. 

code

 - (Optional) Specify that the rule will apply to the ICMP Code traffic value. 

<value 0-255>

 - Enter the ICMP code traffic value here. This value must be between 0 

and 255. 

igmp

 - (Optional) Specify to configure the IGMP parameters. 

type

 - (Optional) Specify that the rule will apply to the IGMP Type traffic value. 

<value 0-255>

 - Enter the IGMP type traffic value here. This value must be between 0 

and 255. 

tcp

 - Specify to configure the TCP parameters. 

src_port

 - (Optional) Specify that the rule will apply to a range of TCP source ports. 

<value 0-65535>

 - Enter the TCP source port value here. This value must be between 

0 and 65535. 

mask

 - (Optional) Specify an additional mask parameter that can be configured. 

<hex 0x0-0xffff>

 - Enter the source port mask here. 

dst_port

 - (Optional) Specify that the rule will apply to a range of TCP destination ports. 

<value 0-65535>

 - Enter the TCP destination port value here. This value must be 

between 0 and 65535. 

mask

 - (Optional) Specify an additional mask parameter that can be configured. 

<hex 0x0-0xffff>

 - Enter the destination port mask here. 

flag

 - (Optional) Specify the TCP flag fields. 

all

 - Specify that all the TCP flags will be used in this configuration. 

urg

 - (Optional) Specify that the TCP flag field will be set to 'urg'. 

ack

 - (Optional) Specify that the TCP flag field will be set to 'ack'. 

psh

 - (Optional) Specify that the TCP flag field will be set to 'psh'. 

rst

 - (Optional) Specify that the TCP flag field will be set to 'rst'. 

syn

 - (Optional) Specify that the TCP flag field will be set to 'syn'. 

fin

 - (Optional) Specify that the TCP flag field will be set to 'fin'. 

udp

 - Specify to configure the UDP parameters. 

src_port

 - (Optional) Specify the UDP source port range. 

<value 0-65535>

 - Enter the UDP source port value here. This value must be between 

0 and 65535. 

mask

 - (Optional) Specify an additional mask parameter that can be configured. 

<hex 0x0-0xffff>

 - Enter the source port mask here. 

dst_port

 - (Optional) Specify the UDP destination port range. 

<value 0-65535>

 - Enter the UDP destination port value here. This value must be 

between 0 and 65535. 

mask

 - (Optional) Specify an additional mask parameter that can be configured. 

<hex 0x0-0xffff>

 - Enter the destination port mask here. 

protocol_id

 - Specify that the rule will apply to the value of IP protocol ID traffic. 

<value 0-255>

 - Enter the protocol ID used here. 

user_define

 - (Optional) Specify that the rule will apply to the IP protocol ID and that the 

mask options behind the first 4 bytes of the IP payload. 

<hex 0x0-0xffffffff>

 - Enter the user-defined mask value here. 

mask

 - Specify an additional mask parameter that can be configured. 

<hex 0x0-0xffffffff>

 - Enter the mask value here. 

packet_content

 - A maximum of 4 offsets can be specified. Each offset defines 4 bytes of data 

which is identified as a single UDF field. 

offset_chunk_1

 – (Optional) Specify the value of the packet bytes to be matched. Offset 

chunk 1 will be used. 

<hex 0x0-0xffffffff>

 - Enter the offset chunk 1 mask here. 

Summary of Contents for DGS-3000 series














































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DGS-3000 series

Barco MatrixPRO-II DVI 16x16 User Manual preview
MatrixPRO-II DVI 16x16
Brand: Barco Pages: 43
Barco matrixpro-II Information Manual preview
matrixpro-II
Brand: Barco Pages: 5
Cabletron Systems Netlink FRX4000 Installation And Setup Manual preview
Netlink FRX4000
Brand: Cabletron Systems Pages: 8
Cabletron Systems 9C300-1 Upgrade Instructions preview
9C300-1
Brand: Cabletron Systems Pages: 4
Cabletron Systems MMAC-Plus 9F106-02 Reference Manual preview
MMAC-Plus 9F106-02
Brand: Cabletron Systems Pages: 7
i-MO 540 Series Product Installation Manual preview
540 Series
Brand: i-MO Pages: 58
Idis DR-6100 Series Operation Manual preview
DR-6100 Series
Brand: Idis Pages: 86
Paradyne Hotwire 6301 Installation Instructions Manual preview
Hotwire 6301
Brand: Paradyne Pages: 20
Paradyne COMSPHERE 3610 Installation Instructions preview
COMSPHERE 3610
Brand: Paradyne Pages: 2
Vonets MINI300 Quick Setting Manual preview
MINI300
Brand: Vonets Pages: 8
Texas Instruments ThunderLAN TNETE100A Programmer'S Manual preview
ThunderLAN TNETE100A
Brand: Texas Instruments Pages: 179
SyChip WLAN6065SD User Manual preview
WLAN6065SD
Brand: SyChip Pages: 24
AYRSTONE AyrMesh IndoorAP Instructions preview
AyrMesh IndoorAP
Brand: AYRSTONE Pages: 2
axing EOC 30-01 Quick Start Manual preview
EOC 30-01
Brand: axing Pages: 4
ATEN Slideaway CL1008 User Manual preview
Slideaway CL1008
Brand: ATEN Pages: 77
Watchguard Firebox T20 Hardware Manual preview
Firebox T20
Brand: Watchguard Pages: 21
Avocent Cyclades CS4008 Specifications preview
Cyclades CS4008
Brand: Avocent Pages: 2
Parker Sporlan Division SCS-PB Series Installation And Operating Instructions Manual preview
Sporlan Division SCS-PB Series
Brand: Parker Pages: 10

Brands by name

Popular brands

Load more brands