DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
708
Restrictions
Only Administrators can issue this command.
Example
To download firmware from an RCP server:
DGS-3000-26TC:admin#download firmware_fromRCP username rcp_user 10.90.90.90
src_file /home/
Command: download firmware_fromRCP username rcp_user 10.90.90.90 src_file
/home/
Connecting to server................... Done.
Download firmware...................... Done. Do not power off !!
Please wait, programming flash......... Done.
Saving current settings to NV-RAM...... Done.
DGS-3000-26TC:admin#
upload firmware_toRCP
71-2
Description
This command is used to upload firmware from this Switch to a Remote Copy Protocol (RCP)
server.
Format
upload firmware_toRCP [{username <username 15>} {<ipaddr>} dest_file <path_filename
64> | rcp: <string {user@}ipaddr/path_filename>] {src_file <pathname 64>}]
Parameters
username
- (Optional) Specify the remote user name on the RCP server.
<username 15>
- Enter the remote user name on the RCP server.
<ipaddr>
- (Optional) Enter the IP address of the RCP server.
dest_file
- Specify the path name on the RCP server.
<path_filename 64>
- Enter the path name on the RCP server.
rcp:
- Specify the path and the login credentials on the RCP server that will be used for the
upload.
<string {user@}ipaddr/path_filename>
- Enter the path and the login credentials on the
RCP server that will be used for the upload. No spaces are allowed. For example,
[email protected]/home/user_name/firmware.had.
src_file
- (Optional)
Specify the path name of the source file. If not specified, the boot-up image
on the device will be uploaded.
<pathname 64>
- Enter the path name of the source file.
Restrictions
Only Administrators can issue this command.
Summary of Contents for DGS-3000 series
Page 1: ......