DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
743
Format
disable smtp
Parameters
None.
Restrictions
Only Administrators can issue this command.
Example
To disable SMTP status:
DGS-3000-26TC:admin#disable smtp
Command: disable smtp
Success.
DGS-3000-26TC:admin#
config smtp
77-3
Description
This command is used to configure SMTP client parameters.
Format
config smtp {server <ipaddr> | server_port <tcp_port_number 1-65535> | self_mail_addr
<mail_addr 64> | [add mail_receiver <mail_addr 64> | delete mail_receiver <index 1-8>] |
server_ipv6 <ipv6addr> | server_port_ipv6 <tcp_port_number 1-65535>}(1)
Parameters
server
- Specify the SMTP server IP address.
<ipaddr>
- Enter the SMTP server IP address
server_port
- Specify the SMTP server port.
<tcp_port_number 1-65535>
- Enter the port number between 1 and 65535.
self_mail_addr
- Specify the sender’s mail address.
<mail_addr 64>
- Enter the mail address with maximum of 64 characters.
add mail_receiver
- Specify to add mail receiver’s address.
<mail_addr 64>
- Enter the mail address with maximum of 64 characters.
delete mail_receiver
- Specify to delete mail receiver’s address.
<index 1-8>
- Enter the index number.
server_ipv6
- Specify the SMTP server IPv6 address.
<ipv6addr>
- Enter the IPv6 server IP address.
server_port_ipv6
- Specify the SMTP IPv6 server’s TCP port.
<tcp_port_number 1-65535>
- Enter the TCP port number.
Summary of Contents for DGS-3000 series
Page 1: ......