DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
108
delete arpentry
7-2
Description
This command is used to delete an ARP entry, by specifying either the IP address of the entry or
all. Specify ‘all’ clears the Switch’s ARP table.
Format
delete arpentry [<ipaddr> | all]
Parameters
<ipaddr>
- Enter the end node or station IP address.
all
- Specify to delete all ARP entries.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete an entry of IP address 10.48.74.121 from the ARP table:
DGS-3000-26TC:admin#delete arpentry 10.48.74.121
Command: delete arpentry 10.48.74.121
Success.
DGS-3000-26TC:admin#
config arpentry
7-3
Description
This command is used to configure a static entry’s MAC address in the ARP table. Specify the IP
address and MAC address of the entry.
Format
config arpentry <ipaddr> <macaddr>
Parameters
<ipaddr>
- Enter the end node or station IP address.
<macaddr>
- Enter the corresponding MAC address of the IP address above.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Summary of Contents for DGS-3000 series
Page 1: ......