DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
503
Example
To display statistics information of port 1:
DGS-3000-26TC:admin#show lldp statistics ports 1
Command: show lldp statistics ports 1
Port ID : 1
---------------------------------------------
LLDPStatsTXPortFramesTotal : 23
LLDPStatsRXPortFramesDiscardedTotal : 0
LLDPStatsRXPortFramesErrors : 0
LLDPStatsRXPortFramesTotal : 0
LLDPStatsRXPortTLVsDiscardedTotal : 0
LLDPStatsRXPortTLVsUnrecognizedTotal : 0
LLDPStatsRXPortAgeoutsTotal : 0
DGS-3000-26TC:admin#
config lldp_med fast_start repeat_count
46-14
Description
This command is used to configure the fast start repeat count. When an LLDP-MED Capabilities
TLV is detected for an MSAP identifier not associated with an existing LLDP remote system MIB,
the application layer shall start the fast start mechanism and set the ‘medFastStart’ timer to
‘medFastStartRepeatCount’ times 1.
Format
config lldp_med fast_start repeat_count <value 1-10>
Parameters
<value 1-10>
- Enter a fast start repeat count value between 1 and 10. The default value is 4.
Restrictions
Only Administrators and Operators can issue this command.
Example
To configure a LLDP-MED fast start repeat count of 5:
DGS-3000-26TC:admin#config lldp_med fast_start repeat_count 5
Command: config lldp_med fast_start repeat_count 5
Success.
DGS-3000-26TC:admin#
Summary of Contents for DGS-3000 series
Page 1: ......