Eaton Power Xpert Meter 2000, Instructions Manual

Page: 1 / 16

Connecting a NetComm Wireless NTC-140W Router to an Eaton® Network Card P-164000722—Rev 04 1
C Coonnnneeccttiinngg aa N NeettC Coom mm m W Wiirreelleessss N NTTC C--114400W W S Seerriieess R Roouutteerr ttoo aann EEaattoonn
®
N Neettw woorrkk C Caarrdd
IInnttrroodduuccttiioonn
This document provides instructions for connecting a NetComm Wireless NTC-140W Series wireless router to
one of the following Eaton connectivity cards:
• Power Xpert Gateway UPS (PXGX-UPS)
• Power Xpert Gateway Minislot UPS (PXGMS)
• Gigabit Network (Network-M2)
P Prreerreeqquuiissiitteess
• Eaton UPS with a PXGX-UPS, PXGMS, or Network-M2 card
• PuTTy or HyperTerminal software
• USB-to-USB (Type B) cable for PXGX-UPS
• USB-to-USB (MiniTypeB) for PXGMS
• USB-to-USB (MicroUSB B) for Network-M2
• Serial COM port or USB-to-serial 9-pin male adapter
• An existing PredictPulse account (refer to the PredictPulse Quick Start Guide )
N NTTC C--114400W W S Seerriieess R Roouutteerr IInnssttaallllaattiioonn G Guuiiddeelliinneess
Refer to the Quick Start Guide provided with the NetComm Wireless NTC-140W series router for instructions
on mounting the router and connecting power.
NOTE The router must be powered by a 120V outlet powered by the UPS. This ensures that
the router is protected during a power outage.
C Coonnnneeccttiinngg tthhee R Roouutteerr ttoo aa P PX XG GX X--U UP PS S oorr P PX XG GM MS S C Caarrdd
Connect the NTC-140W Series router and Eaton network card. Use the included Ethernet cable or equivalent.
• For a PXGX-UPS card, connect the Ethernet cable from the LAN port on the NTC-140W Series router to
the Upstream port on the card (see Figure 1 ):
• For a PXGMS card, connect the Ethernet cable from the LAN part on the NTC-140W Series router to the
Ethernet 10/100 port on the card (see Figure 2 )
Route the Ethernet cable into the UPS via the appropriate conduit holes. Once connected, the LEDs on the
active Ethernet port, as well as the green Power LED and Status LEDs should light.
Figure 1. Power Xpert Gateway UPS (PXGX-UPS) Card