DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
816
Chapter 85
Telnet Client Command List
telnet
[<ipaddr> | <domain_name 255> |<ipv6addr>] {tcp_port <value 1-65535>}
telnet
85-1
Description
This command is used to start the Telnet client to connect to the specific Telnet server. The
parameters specified by the command will only be used for the establishment of this specific
session. They will not affect the establishment of other sessions.
Format
telnet [<ipaddr> | <domain_name 255> |<ipv6addr>] {tcp_port <value 1-65535>}
Parameters
<ipaddr>
- Enter the IP address of the Telnet server.
<domain_name 255>
- Enter the domain name of the Telnet server.
<ipv6addr>
- Enter the IPv6 address of the Telnet server.
tcp_port
- (Optional) Specify the Telnet server port number to be connected. If not specified, the
default port is 23.
<value 1-65535>
- Enter the TCP port number used here. This value must be between 1 and
65535.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
Telnet to a Switch by specifying the IP address:
DGS-3000-26TC:admin#telnet 10.90.90.90
Command: telnet 10.90.90.90
DGS-3000-26TC Gigabit Ethernet Switch
Command Line Interface
Firmware: Build 1.10.013
Copyright(C) 2014 D-Link Corporation. All rights reserved.
UserName:
Summary of Contents for DGS-3000 series
Page 1: ......
