manualshive.com logo in svg

D-Link DGS-3000 series, Reference Manual

The D-Link DGS-3000 series is a high-performance networking solution designed for fast and reliable data transmission. Ensure seamless hardware installation with the comprehensive Hardware Installation Manual available for free download on our website manualshive.com. Gain easy access to the manual and unleash the full potential of your DGS-3000, hassle-free.

Share
Download
background image

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide 

89 

profile_name

 - The name of the profile must be specified. The maximum length is 32 characters. 

<name 32>

 - Enter the profile name here. 

ethernet

 - Specify this is an ethernet mask. 

vlan

 - (Optional) Specify a VLAN mask. Only the last 12 bits of the mask will be considered. 

<hex 0x0-0x0fff>

 - Enter the VLAN mask value here. 

source_mac

 - (Optional) Specify the source MAC mask. 

<macmask>

 - Enter the source MAC address used here. 

destination_mac

 - (Optional) Specify the destination MAC mask. 

<macmask>

 - Enter the destination MAC address used here. 

802.1p

 - (Optional) Specify the 802.1p priority tag mask. 

ethernet_type

 - (Optional) Specify the Ethernet type mask. 

ip

 - Specify this is a IPv4 mask. 

vlan

 - (Optional) Specify a VLAN mask. Only the last 12 bits of the mask will be considered. 

<hex 0x0-0x0fff>

 -Enter the VLAN mask value here. 

source_ip_mask

 - (Optional) Specify a source IP address mask. 

<netmask>

 - Enter the source IP address mask here. 

destination_ip_mask

 - (Optional) Specify a destination IP address mask. 

<netmask>

 - Enter the destination IP address mask here. 

dscp

 - (Optional) Specify the DSCP mask. 

icmp

 - (Optional) Specify that the rule applies to ICMP traffic. 

type

 - Specify the type of ICMP traffic. 

code

 - Specify the code of ICMP traffic 

igmp

 - (Optional) Specify that the rule applies to IGMP traffic. 

type

 - Specify the type of IGMP traffic. 

tcp

 - (Optional) Specify that the rule applies to TCP traffic. 

src_port_mask

 - (Optional) Specify the TCP source port mask. 

<hex 0x0-0xffff>

 - Enter the TCP source port mask here. 

dst_port_mask

 - (Optional) Specify the TCP destination port mask. 

<hex 0x0-0xffff>

 - Enter the TCP destination port mask here. 

flag_mask

 - (Optional) Specify the TCP flag field mask. 

all

 – Specify that all the flags will be used for the TCP mask. 

urg

 – (Optional) Specify that the TCP flag field will be set to ‘urg’. 

ack

 - (Optional) Specify that the TCP flag field will be set to ‘ack’. 

psh

 - (Optional) Specify that the TCP flag field will be set to ‘psh’. 

rst

 - (Optional) Specify that the TCP flag field will be set to ‘rst’. 

syn

 - (Optional) Specify that the TCP flag field will be set to ‘syn’. 

fin

 - (Optional) Specify that the TCP flag field will be set to ‘fin’. 

udp

 - (Optional) Specify that the rule applies to UDP traffic. 

src_port_mask

 - (Optional) Specify the UDP source port mask. 

<hex 0x0-0xffff>

 - Enter the UDP source port mask here. 

dst_port_mask

 - (Optional) Specify the UDP destination port mask. 

<hex 0x0-0xffff>

 - Enter the UDP destination port mask here. 

protocol_id_mask

 - (Optional) Specify that the rule applies to IP protocol ID traffic. 

<0x0-0xff>

 - Enter the protocol ID mask here. 

user_define_mask

 - (Optional) Specify that the rule applies to the IP protocol ID, and that 

the mask option behind the IP header length is 4 bytes. 

<hex 0x0-0xffffffff>

 - Enter a user-defined mask value here. 

packet_content_mask

 - Specify the packet content mask. Only one packet_content_mask 

profile can be created. 

offset_chunk_1

 - (Optional) Specify that the offset chunk 1 will be used. 

<value 0-31>

 - Enter the offset chunk 1 value here. This value must be between 0 and 31. 

<hex 0x0-0xffffffff>

 - Enter the offset chunk 1 mask here. 

offset_chunk_2

 - (Optional) Specify that the offset chunk 2 will be used. 

<value 0-31>

 - Enter the offset chunk 2 value here. This value must be between 0 and 31. 

<hex 0x0-0xffffffff>

 - Enter the offset chunk 2 mask here. 

offset_chunk_3

 - (Optional) Specify that the offset chunk 3 will be used. 

<value 0-31>

 - Enter the offset chunk 3 value here. This value must be between 0 and 31. 

<hex 0x0-0xffffffff>

 - Enter the offset chunk 3 mask here. 

offset_chunk_4

 - (Optional) Specify that the offset chunk 4 will be used. 

<value 0-31>

 - Enter the offset chunk 4 value here. This value must be between 0 and 31. 

Summary of Contents for DGS-3000 series














































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DGS-3000 series

TP-Link VIGI NVR1008 Quick Installation Manual preview
VIGI NVR1008
Brand: TP-Link Pages: 2
ZyXEL Communications P-336M Specifications preview
P-336M
Brand: ZyXEL Communications Pages: 2
Ubiquiti AmpliFi AFi-G Quick Start Manual preview
AmpliFi AFi-G
Brand: Ubiquiti Pages: 20
AMG Systems AMG9240-C User Manual preview
AMG9240-C
Brand: AMG Systems Pages: 2
E-LINX EIR410-2SFP-T User Manual preview
EIR410-2SFP-T
Brand: E-LINX Pages: 24
Z-Wave RAZBERRY 7 PRO Quick Start Manual preview
RAZBERRY 7 PRO
Brand: Z-Wave Pages: 6
Patton electronics FORESIGHT 6300 User Manual preview
FORESIGHT 6300
Brand: Patton electronics Pages: 145
Quidway S3000-EI Series Operation Manual preview
S3000-EI Series
Brand: Quidway Pages: 16
Buffalo BS-GS2008P Quick Setup Manual preview
BS-GS2008P
Brand: Buffalo Pages: 2
Raven RFMOW V2 User Manual preview
RFMOW V2
Brand: Raven Pages: 33
LUX LUMEN 10230 Manual preview
10230
Brand: LUX LUMEN Pages: 41
ADTRAN 239 T1 HDSL4 Installation And Maintenance Manual preview
239 T1 HDSL4
Brand: ADTRAN Pages: 20
ADTRAN NetVanta 4430 Quick Start preview
NetVanta 4430
Brand: ADTRAN Pages: 4
Billion BIPAC 7500 Quick Start Manual preview
BIPAC 7500
Brand: Billion Pages: 12
Huawei NIP6320 Quick Start Manual preview
NIP6320
Brand: Huawei Pages: 4
Huawei RT-16ASE Specifications preview
RT-16ASE
Brand: Huawei Pages: 2
ZyXEL Communications DIMENSION ES-1124 User Manual preview
DIMENSION ES-1124
Brand: ZyXEL Communications Pages: 30
Edimax AR-7064Mg+ Quick Installation Manual preview
AR-7064Mg+
Brand: Edimax Pages: 50

Brands by name

Popular brands

Load more brands