DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
781
Chapter 80
Single IP Management
Command List
enable sim
disable sim
show sim
{[candidates {<candidate_id 1-100>} | members{<member_id 1-32>} | group
{commander_mac <macaddr>} | neighbor]}
reconfig
{member_id <value 1-32> | exit}
config sim_group
[add <candidate_id 1-100> {<password>} | delete <member_id 1-32>]
config sim
[[commander {group_name <groupname 64>} | candidate] | dp_interval <sec 30-90> |
hold_time <sec 100-255>]
download sim_ms
[firmware_from_tftp | configuration_from_tftp] {[<ipaddr> | <ipv6addr>]
<path_filename> {[members <mslist 1-32> | all]}}
upload sim_ms
[configuration_to_tftp | log_to_tftp] {[<ipaddr> | <ipv6addr>] <path_filename>
{[members <mslist> | all]}}
config sim trap
[enable | disable]
enable sim
80-1
Description
This command is used to configure the single IP management on the Switch as enabled.
Format
enable sim
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable SIM:
DGS-3000-26TC:admin#enable sim
Command: enable sim
Success.
DGS-3000-26TC:admin#
Summary of Contents for DGS-3000 series
Page 1: ......
