D-Link DGS-3000 series, Reference Manual

Page: 462 / 909

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
458
Parameters
add - Specify to add a network address to which the traffic will not be blocked. Up to 100 network
addresses can be added.
delete - Specify to delete a network address to which the traffic will not be blocked.
ipadddress - Specify the network address for the update server.
<network address> - Enter the network IP address here.
ipv6address - Specify the IPv6 network address for the update server network. To set a specific
IPv6 network address, please use “/” to separate the IPv6 address and the number of network
mask bits. If TCP port or UDP port number is not specified, all TCP/UDP ports are accessible
<ipv6networkaddr> - Enter the IPv6 network address here.
tcp_port - (Optional) Specify a TCP port number between 1 and 65535.
<port_number 1-65535> - Enter a TCP port value between 1 and 65535.
udp_port - (Optional) Specify a UDP port number between 1 and 65535.
<port_number 1-65535> - Enter a UDP port value between 1 and 65535.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure the update servers:
DGS-3000-26TC:admin#config jwac update_server add ipaddress 10.1.1.1/8
Command: config jwac update_server add ipaddress 10.1.1.1/8
Update Server 10.0.0.0/8 is added.
Success.
DGS-3000-26TC:admin#
config jwac switch_http_port 42-17
Description
This command is used to configure the TCP port which the JWAC switch listens to. This port
number is used in the second stage of the authentication. PC users will connect to the page on the
Switch to input the user name and password. If not specified, the default port number is 80. If no
protocol is specified, the protocol is HTTP.
HTTP cannot run on TCP port 443, and HTTPS cannot run on TCP port 80.
Format
config jwac switch_http_port <tcp_port_number 1-65535> {[http | https]}
Parameters
<tcp_port_number 1-65535> - Enter a TCP port which the JWAC switch listens to and uses to
finish the authenticating process.
http - (Optional) Specify the JWAC run HTTP protocol on this TCP port.