DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
232
Parameters
string
- (Optional) Displays the DHCP relay Option 60 string specified by the user.
<multiword 255>
- Enter the entry's string value here. This value can be up to 255 characters
long.
ipadddress
- (Optional) Displays the IP address specified by the user.
<ipaddr>
- Enter the IP address here.
default
- (Optional) Displays the defaut DHCP relay Option 60 information.
If no parameter is specified then all the DHCP option 60 entries will be displayed.
Restrictions
None.
Example
To show DHCP option 60 information:
DGS-3000-26TC:admin#show dhcp_relay option_60
Command: show dhcp_relay option_60
Default Processing Mode: Drop
Default Servers:
Matching Rules:
String Match Type IP Address
------- --------- ---------
abc Exact Match 10.90.90.1
Total Entries : 1
DGS-3000-26TC:admin#
config dhcp_relay option_61
20-16
Description
This command is used to decide whether the DHCP relay will process the DHCP option 61 or not.
When option 61 is enabled, if the packet does not have option 61, then the relay servers cannot be
determined based on option 61.
If the relay servers are determined based on option 60 or option 61, then per IPIF configured
servers will be ignored.
If the relay servers are not determined either by option 60 or option 61, then per IPIF configured
servers will be used to determine the relay servers.
Format
config dhcp_relay option_61 state [enable | disable]
Summary of Contents for DGS-3000 series
Page 1: ......