DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
273
Chapter 22
DHCP Server Screening
Command List
create filter dhcpv6_server permit sip
<ipv6addr> ports [<portlist> | all]
create filter icmpv6_ra_all_node permit sip
<ipv6addr> ports [<portlist> | all]
config filter dhcp_server
[add permit server_ip <ipaddr> {client_mac <macaddr>} ports
[<portlist> | all] | delete permit server_ip <ipaddr> {client_mac <macaddr>} ports [<portlist> | all]
| ports [<portlist> | all] state [enable | disable] | illegal_server_log_suppress_duration [1min |
5min | 30min] | trap_log [enable | disable]]
config filter dhcpv6_server log
[enable | disable]
config filter dhcpv6_server ports
[<portlist> | all] state [enable | disable]
config filter dhcpv6_server trap
[enable | disable]
config filter icmpv6_ra_all_node log
[enable | disable]
config filter icmpv6_ra_all_node ports
[<portlist> | all] state [enable | disable]
config filter icmpv6_ra_all_node trap
[enable | disable]
delete filter dhcpv6_server permit sip
<ipv6addr>
delete filter icmpv6_ra_all_node permit sip
<ipv6addr>
show filter dhcp_server
show filter dhcpv6_server
show filter icmpv6_ra_all_node
create filter dhcpv6_server permit sip
22-1
Description
This command is used to create a permit entry for DHCPv6 server filtering. The specific DHCPv6
server packets, with the source IPv6 address, will be forwarded on the specified port(s).
Format
create filter dhcpv6_server permit sip <ipv6addr> ports [<portlist> | all]
Parameters
<ipv6addr>
- Enter the source address of the entry which will be created into the Filter DHCPv6
server forward list.
ports
- Specify the list of ports used for this configuration.
<portlist>
- Enter the list of ports, used for this configuration, here.
all
- Specify that all ports will be used for this configuration.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To create a Filter DHCPv6 server permit entry on port 5:
Summary of Contents for DGS-3000 series
Page 1: ......