D-Link DGS-3000 series, Reference Manual, Page: 597 / 909

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
593
Parameters
<profile_name 1-32> - Enter the multicast VLAN profile name. The maximum length is 32
characters.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To create an MLD snooping multicast group profile with the name “Knicks”:
DGS-3000-26TC:admin#create mld_snooping multicast_vlan_group_profile Knicks
Command: create mld_snooping multicast_vlan_group_profile Knicks
Success.
DGS-3000-26TC:admin#
config igmp_snooping multicast_vlan 55-9
Description
This command is used to add member ports and source ports to a list of multicast VLAN member
ports. Member ports automatically become untagged members of the multicast VLAN and source
ports automatically become tagged members of the multicast VLAN. However, member ports of
one multicast VLAN are allowed to overlap with member ports on a different multicast VLAN.
A multicast VLAN must first be created using the create igmp_snooping multicast_vlan command
before the multicast VLAN can be configured.
Format
config igmp_snooping multicast_vlan <vlan_name 32> {[add | delete] [member_port
<portlist> | [source_port <portlist> | untag_source_port <portlist>] | tag_member_port
<portlist>] | state [enable|disable] | replace_source_ip <ipaddr> | remap_priority [<value 0-
7> | none] {replace_priority}}(1)
Parameters
<vlan_name 32> - Enter the multicast VLAN here. The VLAN name can be up to 32 characters
long.
add - Specify that the port will be added to the specified multicast VLAN.
delete - Specify that the port will be deleted from the specified multicast VLAN.
member_port - A member port or range of member ports to be added to the multicast VLAN.
The specified range of ports will become untagged members of the multicast VLAN.
<portlist> - Enter the list of port to be configured here.
source_port - A port or range of ports to be added to the multicast VLAN.
<portlist> - Enter the list of port to be configured here.
untag_source_port - Specify the source port or range of source ports as untagged members of
the multicast VLAN. The PVID of the untagged source port is automatically changed to the
multicast VLAN. Source ports must be either tagged or untagged for any single multicast
VLAN, i.e. both types cannot be members of the same multicast VLAN.
<portlist> - Enter the list of port to be configured here.