DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
160
1-4294967295>] ma [<string 22> | ma_index <uint 1-4294967295>]] {trans_id <uint>}
delete cfm linktrace
{[md [<string 22> | md_index <uint 1-4294967295>] {ma [<string 22> |
ma_index <uint 1-4294967295>] {mepid <int 1-8191>}} | mepname <string 32>]}
show cfm mipccm
config cfm mp_ltr_all
[enable | disable]
show cfm mp_ltr_all
show cfm remote_mep
[mepname <string 32> | md [<string 22> | md_index <uint 1-
4294967295>] ma [<string 22> | ma_index <uint 1-4294967295>] mepid <int 1-8191>]
remote_mepid <int 1-8191>
show cfm pkt_cnt
{[ports <portlist> {[rx | tx]} | [rx | tx] | ccm]}
clear cfm pkt_cnt
{[ports <portlist> {[rx | tx]} | [rx | tx] | ccm]}
create cfm md
16-1
Description
This command is used to create a maintenance domain.
Format
create cfm md <string 22> {md_index <uint 1-4294967295>} level <int 0-7>
Parameters
<string 22>
- Enter the maintenance domain name. This name can be up to 22 characters long.
md_index
- (Optional) Specify the maintenance domain index.
<uint 1-4294967295>
- Enter the maintenance domain index value here. This value must be
between 1 and 4294967295.
level
- Specify the maintenance domain level.
<int 0-7>
- Enter the maintenance domain level here. This value must be between 0 and 7.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To create a maintenance domain called “op_domain” and assign a maintenance domain level of
“2”:
DGS-3000-26TC:admin#create cfm md op_domain level 2
Command: create cfm md op_domain level 2
Success.
DGS-3000-26TC:admin#
Summary of Contents for DGS-3000 series
Page 1: ......
