DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
246
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable DHCP class:
DGS-3000-26TC:admin#disable dhcp class
Command: disable dhcp class
Success.
DGS-3000-26TC:admin#
create dhcp excluded_address
21-5
Description
This command is used to create a DHCP server exclude address. The DHCP server assumes that
all IP addresses in a DHCP pool subnet are available for assigning to DHCP clients. Use this
command to specify the IP address that the DHCP server should not assign to clients. This
command can be used multiple times in order to define multiple groups of excluded addresses.
Format
create dhcp excluded_address begin_address <ipaddr> end_address <ipaddr>
Parameters
begin_address
- Specify the starting address of the IP address range.
<ipaddr>
- Enter the starting address of the IP address range.
end_address
- Specify the ending address of the IP address range.
<ipaddr>
- Enter the ending address of the IP address range.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To specify the IP address that DHCP server should not assign to clients:
Summary of Contents for DGS-3000 series
Page 1: ......