DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
398
DGS-3000-26TC:admin#config igmp_snooping static_group vlan default 239.1.1.1
delete 9-10
Command: create igmp_snooping static_group vlan default 239.1.1.1 delete 9-10
Success.
DGS-3000-26TC:admin#
show igmp_snooping static_group
38-12
Description
This command is used to display the IGMP snooping multicast group static members.
Format
show igmp_snooping static_group {[vlan <vlan_name 32> | vlanid <vlanid_list>] <ipaddr>}
Parameters
vlan
- Specify the name of the VLAN on which the static group resides.
<vlan_name 32>
- Enter the VLAN name here. The VLAN name can be up to 32 characters
long.
vlanid
- Specify the ID of the VLAN on which the static group resides.
<vlanid_list>
- Enter the VLAN ID here.
<ipaddr>
- Enter the multicast group IP address.
Restrictions
None.
Example
To display all the IGMP snooping static groups:
DGS-3000-26TC:admin#show igmp_snooping static_group
VLAN ID/Name IP Address Static Member Ports
-------------- ------------------ ------------------------
1 / Default 239.1.1.1 9-10
Total Entries : 1
DGS-3000-26TC:admin#
config igmp_snooping data_driven_learning
38-13
Description
This command is used to enable or disable the data driven learning of an IGMP snooping group.
When data-driven learning is enabled for the VLAN, when the Switch receives the IP multicast
traffic on this VLAN, an IGMP snooping group will be created. That is, the learning of an entry is
Summary of Contents for DGS-3000 series
Page 1: ......